DIY Red, White and Blue Tie Dye Shirt for the Fourth of July

In today'southward post: Learn how to make a red, white and blue necktie dye shirt to wear on the Fourth of July.

Today I'm going to testify you how to make an American flag inspired tie dye shirt for the Quaternary of July. I'll cover everything you need to know nearly tie dyeing, including supplies, instructions and tips on how to go along this project from turning into a giant mess. I even take a video that shows y'all exactly how I made my shirt.

How to Make a Ruddy White and Blue Tie Dye Shirt

This is a fun project to practise with your kids during the weeks leading up to July Fourth and so they'll have a new shirt to wear on the holiday. Depending on the dye you employ, you lot may even be able to make the shirts in the morning and have them ready to wearable for fireworks that nighttime!

Please note that I think this project is ameliorate suited to older children – I recommend 8 and up. Very small kids tend to savour squirting the dye on the shirt, but go really impatient when they realize they can't open up their shirt upwardly to see how information technology looks right abroad. Older kids will also be able to exercise more than of the steps on their own. If yous'd like to include younger kids, be sure you lot accept plenty of adult aid and supervision.

As well, remember that necktie dyeing is a multi-step procedure. It's not bad if you are merely doing a couple of shirts, but if y'all end up tie dyeing shirts with a large group information technology's going to take someone a long time to rinse and launder all the shirts before they can be worn.

What type of Dye should I employ?

The process for making your shirts will vary slightly depending on which dye or tie dye kit you lot cull to use. Here are some options:

one. Create Nuts Tie Dye kit from Walmart. This is the dye that I used. I similar these kits because yous tin can buy private colors, meaning if y'all want to make a flag shirt you can just buy ruby and blueish and not a whole rainbow of colors you may not apply. Additionally, each color comes with a squeeze bottle with powdered dye inside information technology, a pair of gloves, and 5 condom bands (you lot volition likely want to become extra rubber bands). These type of tie dye kits are very convenient because all yous have to practice is add water inside the included squeeze bottle and shake it and your dye is gear up to get. I also purchased a package of soda ash, which is sold correct next to these tie dye kits from the same manufacturer, which is supposed to aid the colors stay more vibrant.

These kits are very convenient and very inexpensive. However, I didn't experience similar the colors stayed as bright as I wished they had and I recall the kits over gauge how many shirts you tin can make with each bottle (if you lot buy 1 canteen of bluish and 1 canteen of red you can probably make 3 flag shirts). Additionally, this make recommends you let the dyed shirt set for at to the lowest degree 6-viii hours before rinsing and washing, then y'all probably won't be able to wear the shirt until the next day. But for the price, I felt like it was a good value and my kids were super happy with their shirts.

2. Tie Dye kits from some other brand, such every bit Tulip. These are like to the Create Basics tie dye kits where yous get a squeeze bottle with powdered dye already in information technology, but the Tulip brand says you practise not need to pretreat your soda ash. I haven't used this make and then I'm not sure if the colors stay ameliorate or not…only it also looks similar the Tulip brand is mostly sold out locally and online.

three. Rit Dye. Rit dye is often sold in concentrated bottles, which you can purchase in many different colors. In my experience, Rit dye gives you brighter colors, and then if that'southward important to you Rit may be the way to get. Additionally, Rit dye recommends rut setting the shirts in your microwave in just 2 minutes, meaning your shirt can exist washed much quicker. However, Rit dye is more expensive if you lot are simply making a couple of shirts because of the bottle size, and if you go Rit dye yous will besides need to purchase gloves and clasp bottles separately. If you decide to employ Rit dye, follow the instructions on the dye or their website as some things volition exist a little dissimilar than what I describe below.

Red White and Blue Tie Dye Shirt Supplies

To make a flag inspired tie dye shirt, you will need the following:

• White shirt: 100% cotton is preferable considering it will have the dye much better. I used a shirt that was 60/xl cotton fiber/poly and I had to leave the dye on for much longer to get the dye to accept
• Ruby and blue dye: as mentioned to a higher place I used the Create Basics brand from Walmart because it was inexpensive!
• Plastic gloves
• Safety bands: some may be included in your kit but you lot may desire to apply more
• Squeeze bottle for each color if not included in your tie dye kit
• Big blackness plastic bags to protect your work surface
• Paper towels
• Plastic wrap
• Optional: soda ash or other color enhancer made by the same make as your dye

Get the Shirt Set up to be dyed

Make sure you lot wash and dry your shirt in advance.

So you can rubber band the shirt to create a flag inspired blueprint. Lay the shirt on a flat surface and mentally depict a line from under the left arm diagonally upwardly to the right side of the neckline:

Starting under the left arm, offset pinching up the shirt to get together it together along that line (you can encounter me doing this in the video beneath). Go on gathering until you get to the right side of the neckline. Tightly wrap a rubber band effectually the shirt at that betoken.

Then, working diagonally down the shirt, identify another rubber band every 2 inches or so until you get to the bottom right corner of the shirt.

Finally, go back and double upwardly on the prophylactic bands if desired. I applied red dye to every modest section of the shirt, leaving but the part under the rubber bands to stay white, so I used two safe bands betwixt each section to ensure some areas stayed white. You may also cull to employ red dye to every other small section to try to become more fifty-fifty looking stripes.

At this point you'll get the shirt wet. Also, if you are using the Create Basics brand tie dye, yous can soak the shirt in a solution of water and soda ash to help keep the colors from fading. Simply mix one package of soda ash into a gallon of water and soak the shirt for 20 minutes, then squeeze the backlog water out of the shirt before dyeing.

How to Tie Dye a flag inspired shirt – VIDEO

Watch the video below to see the unabridged tie-dye process. Please annotation, if you do not see a video straight beneath this paragraph that means yous accept an ad-blocker. Please whitelist this site or visit it using a browser that doesn't have an ad blocker in order to view the video. I know that no ane likes to sentry ads, but they permit me to go along create gratuitous content for you. Thanks!

How to Use the Dye

Before yous begin the actual dyeing process, be sure to set up your area:

• Encompass your work area with a large black plastic bag
• Put on gloves
• Have paper towels handy to wipe up whatever spills or backlog dye
• Mix the dye and put it in squeeze bottles for easy application

Start by squirting blue dye all over the big department at the meridian of the shirt. Clasp slowly so you don't make a mess and be careful non to get bluish dye on the residuum of the shirt. As y'all dye the superlative section bluish, it's a good idea to go on a paper towel handy and wipe up any excess dye that ends upwards on your work surface. Also remember that y'all are going to have bluish dye on your gloves, then don't touch the other part of your shirt! Lift upwardly the section you're working on and add more than blue dye to the back if needed.

Once you are washed applying blueish dye, use paper towels to get all the blue dye off your gloves.

Next you'll apply reddish dye to the smaller sections of your shirt. I practical dye toevery section, but you lot could also apply dye to every other department if your wish. You will need to employ dye to the shirt then roll it over to get dye on the back. As the shirt soaks up the dye you lot tin utilize more – remember that you desire to use enough dye that it can soak in through all the scrunched upward layers of shirt.

Again, wipe upwardly any backlog dye that is on your work surface.

How to Ready the Dye

Once yous are finished dyeing your shirt, allow information technology residual for a couple of minutes. Then place the shirt on a layer of plastic wrap and fold the wrap around the shirt and printing to seal. You have a couple options for setting the dye:

1. You can exit the shirt for six-viii hours (or more).

two. You tin microwave the shirt for 2 minutes, which should heat set the dye.

Check the instructions for the dye you have chosen to use, because instructions may vary. Our dye recommended letting it set for 6-8 hours, but nosotros were impatient so we used the microwave instead. On my kids' 100% cotton wool shirts that worked fairly well, although letting them sit for a few hours may accept worked better. However, my cotton/poly shirt faded a LOT when I tried the microwave method. So I redid my shirt and left it to sit for about xviii hours and it worked much better.

NOTE: The colors on my shirt are still not super bright. That'due south probably because it'south not 100% cotton, and may be because I used a cheaper brand of dye. I think it looks fine the way information technology is, but if you want super brilliant colors I'd recommend using RIT dye and 100% cotton. Alternately, you could mix the cheaper brand of dye with less water for a stronger concentration.

Rinse Rinse Rinse + Wash

The last step to making a tie dye shirt is to thoroughly rinse and so wash and dry your shirt.

You need to rinse your shirt until you lot can squeeze information technology and the water coming out runs clear. That's going to take a couple of minutes but go on going until the h2o is completely clear.

Then yous can cut out the rubber bands and bank check out your blueprint – cool!

Finally, you'll want to wash your shirt on cool with just a petty flake of detergent and dry it. Most dye brands recommend washing necktie dyed shirts separately the first couple of times to brand certain they don't bleed onto any other habiliment.

More Quaternary of July ideas

20 fun Fourth of July crafts

Flag Fruit Pizza

Crimson White and Bluish Desserts

arlinepervage.blogspot.com

Source: https://www.itsalwaysautumn.com/diy-red-white-and-blue-tie-dye-shirt-for-the-fourth-of-july.html